View AU6366_5031349.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AU6366
USB2.0 Single LUN Multiple Flash Card Reader Controller
Technical Reference Manual
AU6366
USB2.0 Single LUN Multiple Flash Card Reader Controller
Copyright
Copyright (c) 1997 - 2007. Alcor Micro, Corp. All Rights Reserved. No part of this data sheet may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Alcor Micro, Corp.
Trademark Acknowledgements
The company and product names mentioned in this document may be the trademarks or registered trademarks of their manufacturers.
Disclaimer
Alcor Micro, Corp. reserves the right to change this product without prior notice. Alcor Micro, Corp. makes no warranty for the use of its products and bears no responsibility for any error that appear in this document. Specifications are subject to change without prior notice.
Revision History
Date
Jan 2006 Aug 2006 Nov 2006 July 2007
Revision
1.00W 1.01W 1.02W 1.03W
Description
Official Release Update new address of Los Angeles Office Modify "1.2 Features" Modify "5.6 Power Switch Feature"
Contact Information:
Web site: http://www.alcormicro.com/
China ShenZhen Office Rm.2407-08, Industrial Bank Building No.4013, Shennan Road, ShenZhen,China. 518026 Phone: (0755) 8366-9039 Fax: (0755) 8366-9101 Los Angeles Office 9070 Rancho Park Court Rancho Cucamonga, CA 91730 USA Phone: (909) 483-9900 Fax: (909) 944-0464
Taiwan Alcor Micro, Corp. 4F, No 200 Kang Chien Rd., Nei Hu, Taipei, Taiwan, R.O.C. Phone: 886-2-8751-1984 Fax: 886-2-2659-7723 Santa Clara Office 2901 Tasman Drive, Suite 206 Santa Clara, CA 95054 USA Phone: (408) 845-9300 Fax: (408) 845-9086

Table of Contents
1. Introduction ............................................................ 1
1.1 Description...................................................................................1 1.2 Features........................................................................................1
2. Application Block Diagram ................................... 2 3. Pin Assignment ...................................................... 3 4. System Architecture and Reference Design ....... 6
4.1 AU6366 Block Diagram ...............................................................6
5. Electrical Characteristics ...................................... 7
5.1 Absolute Maximum Ratings........................................................7 5.2 Recommended Operating Conditions .......................................7 5.3 General DC Characteristics ........................................................7 5.4 DC Electrical Characteristics of 3.3V I/O Cells..........................8 5.5 USB Transceiver Characteristics ...............................................8 5.6 Power Switch Feature .................................................................12
6. Mechanical Information ......................................... 13 7. Abbreviations ......................................................... 14
i
List of Figures
Figure 2.1 Block Diagram..................................................................2 Figure 3.1 Pin Assignment Diagram ................................................3 Figure 4.1 AU6366 Block Diagram ...................................................6 Figure 5.1 Built-in card power switch I-V curve ..............................12 Figure 5.2 Card Detect Power-on Timing.........................................12 Figure 6.1 Mechanical Information Diagram ...................................13
List of Tables
Table 3.1 Pin Descriptions ................................................................4 Table 5.1 Absolute Maximum Ratings .............................................7 Table 5.2 Recommended Operating Conditions .............................7 Table 5.3 General DC Characteristics ..............................................7 Table 5.4 DC Electrical Characteristics of 3.3V I/O Cells ...............8 Table 5.5 Electrical characteristics ..................................................8 Table 5.6 Static characteristicDigital pin .....................................9 Table 5.7 Static characteristicAnalog I/O pinsDP/DM..........9 Table 5.8 Dynamic characteristicAnalog I/O pinsDP/DM.....10
ii
1. Introduction
1.1 Description
The AU6366 is a single chip integrated USB 2.0 multimedia card reader controller that enables PC/DVD/Printer to read/write various type of flash media cards. Flash media cards such as CF, SMC, XD, SD, MMC, Memory Stick are widely used in digital camera, cell phone, PDA and MP3 player to store digital photos and compressed music. Performance of AU6366 is maximized by implementing the latest and fastest card specification available form the industry. The AU6366 is designed in shared pin architecture to meet cost and space regulate for Notebook end reunite.
1.2 Features
Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport V1.0 Support CF/MD/SD/MMC/MS/MS_Pro/MS_Duo/xD/SMC compatible flash card Support the latest flash card specification: CF 3.0 (16-bit IDE mode), SD1.1 (HS-SD), MMC4.0 (8-bit), MSPro parallel mode (4-bit), xD 1.2 Hardware DMA engine integrated for performance enhancement Work with default driver from Windows ME/2000/XP and Mac OS X; Windows 98/2000(SP1/SP2) and Mac OS 9 are supported by vendor driver from Alcor. Ping-pong FIFO implementation for concurrent bus operation Support multiple sectors transfer optimize performance Support slot-to-slot read/write operation Support Dynamic Icon Utility Support LED for bus operating indication Power switch integrated to reduce production BOM cost 30MHz 8051 CPU Built in 3.3V to 2.5V regulator Run at 12MHz crystal Available in 48-pin LQFP package
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
1
2. Application Block Diagram
The following application drawing demonstrates a typical card reader block diagram using AU6366. By connecting one card reader to a desktop or notebook PC through USB bus, the AU6366 becomes a bus-powered, high speed USB card reader, which can be used as a bridge for data transfer between Desktop PC and Notebook PC.
Figure 2.1 Block Diagram
Digital Camera
MP3 Player PC with USB Host Controller
PDA
CF/MS/MD/ SMC/SD/MMC AU6366
Moble Phones
PC
2
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
3. Pin Assignment
The AU6366 is delivered in 48pin LQFP form factor. Documented below is a figure shows signal names of each pin and a table in the following page describes each pin in more details.
Figure 3.1 Pin Assignment Diagram
CARDDATA13 CARDDATA12 CARDDATA11 CARDDATA14 CARDDATA10
CARDDATA9
CARDDATA8
CARDDATA7
CARDDATA6
CARDDATA5
CARDDATA4
CARDDATA3
48
CARDDATA15
47
46
45
44
43
42
41
40
39
38
37 36 35
CARDDATA2
1 2
CFWTN
CARDDATA1
CLED
3 4 5 6
34 33 32 31 30 29 28 27 26 25 13 14 15 16 17 18 19 20 21 22 23 24
CARDDATA0
CHIPRESETN
GND
GNDA
VDDA
RPU
7 8 9
ALCOR MICRO AU6366 48PIN LQFP
VDD
CONTROLOUT0 CONTROLOUT1
AVDD
CONTROLOUT2
DP
CONTROLOUT3
DM
10 11 12
CONTROLOUT4
AVSS
CONTROLOUT5
RREF
XDCDN
SMCDN
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
PVDD
XI
XO
VDD25V
VDDH
CPWR_V33
VSSH
MSINS
CFCDN
SDCDN
PVSS
3
Table 3.1 Pin Descriptions Pin #
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
4
Pin Name
CARDDATA15 CFWTN CLED CHIPRESETN GNDA VDDA RPU AVDD DP DM AVSS RREF PVDD XI XO PVSS VDD25V VDDH CPWR_V33 VSSH MSINS SMCDN CFCDN SDCDN XDCDN CONTROLOUT5 CONTROLOUT4 CONTROLOUT3 CONTROLOUT2
I/O
I/O I O I
Description
CF Data15/xD Data7 CF WAITN Card Operating LED Chip Reset, Pull up with RC PLL Ground
I I I I/O I/O
PLL VDD 2.5V Connected with an 1.5k pull up resistor to 3.3 VDD Analog Power 3.3V DP DM Analog Ground
I I I O
Connected an 1k resistor to GND for impedance match OSC Power 3.3V 12 MHz crystal input. 12 MHz crystal output. OSC Ground
O I O
Core Power 2.5V 3.3V for IO pad Card Power 3.3V Power Ground
I I I I I O O O O
MS INS SMC Card Detect CF Card Detect SD Card Detect xD Card Detect CFRESETN and SMWRN/XDWRN CFWRN and SMRDN/XDRDN CFRDN and XDCEN/SMCEN CFAD2 and SMALE/XDALE
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
Pin #
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
Pin Name
CONTROLOUT1 CONTROLOUT0 VDD GND CARDDATA0 CARDDATA1 CARDDATA2 CARDDATA3 CARDDATA4 CARDDATA5 CARDDATA6 CARDDATA7 CARDDATA8 CARDDATA9 CARDDATA10 CARDDATA11 CARDDATA12 CARDDATA13 CARDDATA14
I/O
O O I
Description
CFAD1, MSCLK and SMCLE/XDCLE CFAD0, SDCLK and MSBS Core power 2.5V Core Ground
I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O
CFDATA0, MSDATA0,and SDCMD CFDATA1,MSDATA1,XDWPN,and SMWPN CFDATA2,MSDATA2,and SDWP CFDATA3,MSDATA3,SMRBN,and XDRBN CFDATA4 and SDDATA0 CFDATA5 and SDDATA1 CFDATA6 and SDDATA2 CFDATA7 and SDDATA3 CFDATA8,XDDATA0, and SDDATA4 CFDATA9,XDDATA1, and SDDATA5 CFDATA10,XDDATA2, and SDDATA6 CFDATA11,XDDATA3, and SDDATA7 CFDATA12 and XDDATA4 CFDADA13 and XDDATA5 CFDATA14 and XDDATA6
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
5
4. System Architecture and Reference Design
4.1 AU6366 Block Diagram
Figure 4.1 AU6366 Block Diagram
USB
USB Upstream Port
XCVR
SIE
RAM
CF/MD/SMC/ SD/MMC/MS/ xD Control FIFO
CF MD SMC SD MMC MS xD
2.5 V
Processor
ROM
Arbitrator
2.5V Voltage Regulator /Power Switch
3.3V
12MHz XTAL
6
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
5. Electrical Characteristics
5.1 Absolute Maximum Ratings
Table 5.1 Absolute Maximum Ratings SYMBOL
VDDH VIN VOUT TSTG
PARAMETER
Power Supply Input Signal Voltage Output Signal Voltage Storage Temperature
RATING
-0.3 to VDDH +0.3 -0.3 to 3.6 -0.3 to VDDH +0.3 -40 to 150
UNITS
V V V
O
C
5.2 Recommended Operating Conditions
Table 5.2 Recommended Operating Conditions SYMBOL
VDDH VDD VIN TOPR
PARAMETER
Power Supply Digital Supply Input Signal Voltage Operating Temperature
MIN
3.0 2.25 0 0
TYP
3.3 2.5 3.3
MAX
3.6 2.75 3.6 70
UNITS
V V V
O
C
5.3 General DC Characteristics
Table 5.3 General DC Characteristics SYMBOL
IIN IOZ CIN COUT CBID
PARAMETER
Input current Tri-state leakage current Input capacitance Output capacitance Bi-directional buffer capacitance
CONDITIONS
No pull-up or pull-down
MIN
-10 -10
TYP
1 1 2.8 2.8 2.8
MAX
10 10
UNITS
A A F F F
Pad Limit Pad Limit Pad Limit
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
7
5.4 DC Electrical Characteristics of 3.3V I/O Cells
Table 5.4 DC Electrical Characteristics of 3.3V I/O Cells SYMBOL
VDDH Vil Vih Vol Voh Rpu Rpd Iin Ioz
PARAMETER
Power supply Input low voltage
CONDITIONS
3.3V I/O
Limits
MIN
3.0
TYP
3.3
MAX
3.6 0.8
UNIT
V V V
LVTTL Input high voltage Output low voltage Output high voltage Input pull-up resistance Iol=2~16mA Ioh=2~16mA PU=high, PD=low 2.4 55 40 -10 -10 75 75 1 1 190 190 10 10 2.0 0.4
V V K K A A
Input pull-down resistance PU=low, PD=high Input leakage current Tri-state output leakage current Vin= VDDH or 0
5.5 USB Transceiver Characteristics
Table 5.5 Electrical characteristics Symbol
VD33 VDDU VDDA ICC
Parameter
Analog supply Voltage Digital supply Voltage Operating supply current
Conditions
Min.
3.0 2.25
Typ.
3.3 2.5
Max. Unit
3.6 2.75 73 V V mA
ICC (susp)
High speed operating at 480 MHz In suspend mode, current with 1.5k Suspend supply current pull-up resistor on pin RPU disconnected
120
A
8
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
Table 5.6 Static characteristicDigital pin Symbol Parameter Conditions
Input levels VIL VIH Low-level input voltage High-level input voltage Output levels VOL VOH Low-level output voltage High-level output voltage VDDH-0.2 0.2 V V 2.0 0.8 V V
Min.
Typ.
Max.
Unit
Table 5.7 Static characteristicAnalog I/O pinsDP/DM Symbol Parameter Conditions Min. Typ. Max. Unit
USB2.0 TransceiverHS Input Levelsdifferential receiver VIDP-VIDM High speed differential measured at the 300 input sensitivity connection as application circuit High speed data signaling common mode voltage -50 range High speed squelch detection threshold High speed disconnection detection threshold Squelch detected No squelch detected Disconnection detected Disconnection not detected Output Levels 150 625 525
VHSDIFF
mV
VHSCM
500 100
mV mV mV mV mV
VHSSQ
VHSDSC
VHSOI VHSOL VHSOH VCHIRPJ VCHIRPK
High speed idle level output voltage(differential) High speed low level output voltage(differential) High speed high level output voltage(differential) Chirp-J output voltage differential Chirp-K output voltage differential Resistance Equivalent resistance Driver output impedance used as internal chip only
-10 -10 -360 700 -900
10 10 400 1100 -500
mV mV mV mV mV
RDRV
3
6
9
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
9
Overall resistance including external resistor Termination VTERM
40.5
45
49.5
VDI VCM
VSE VOL VOH
Termination voltage for pull-up resistor on pin 3.0 RPU USB1.1 TransceiverFS/LS Input Levelsdifferential receiver Differential input VIDP-VIDM 0.2 sensitivity Differential common 0.8 mode voltage Input Levelssingle-ended receivers Single ended receiver 0.8 threshold Output levels Low-level output voltage High-level output voltage 0 2.8
3.6
V
V 2.5 V
2.0 0.3 3.6
V V V
Table 5.8 Dynamic characteristicAnalog I/O pinsDP/DM Symbol Parameter Conditions
Driver Characteristics High-Speed Mode tHSR tHSF High-speed differential rise time High-speed differential fall time Full-Speed Mode tFR tFF tFRMA CL=50pF10 to 90 ofVOH-VOL CL=50pF90 to 10 Fall time ofVOH-VOL Excluding the first Differential rise/fall time transition from idle matchingtFR / tFF mode Excluding the first Output signal crossover transition from idle voltage mode Rise time Low-Speed Mode tLR Rise time CL=200pF-600pF 10 to 90of VOH-VOL 75 300 ns 4 4 90 20 20 110 ns ns 500 500 ps ps
Min.
Typ.
Max. Unit
VCRS
1.3
2.0
V
10
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
tLF
Fall time Differential rise/fall time matchingtLR / tLF Output signal crossover voltage High-level output voltage
tLRMA
VCRS VOH
CL=200pF-600pF 90 to 10of VOH-VOL Excluding the first transition from idle mode Excluding the first transition from idle mode
75
300
ns
80
125
1.3 2.8
2.0 3.6
V V
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
11
5.6 Power Switch Feature
Figure 5.1 Built-in card power switch I-V curve
1ms to 10ms ( Depend Load Capacitor )
3.3V+/- 0.3V
CARD_POWER
100ms + System Polling timing
CARD_DETECT
Figure 5.2 Card Detect Power-on Timing
12
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
6. Mechanical Information
Figure 6.1 Mechanical Information Diagram
E E1
GAUGE PLANE D D1 SEATING PLANE L L1
0.25
A1
C1 b e
A2 A
SYMBOLS A A1 A2 c1 D D1 E E1 e b L L1
MIN. MAX. -1.6 0.05 0.15 1.35 1.45 0.09 0.16 9.00 BSC 7.00 BSC 9.00 BSC 7.00 BSC 0.5 BSC 0.17 0.27 0.45 0.75 1 REF
JEDEC OUTLINE: MS-026 BBC DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.25mm PER SIDE. D1 AND E1 ARE MAXIMUM PLASTIC BODY SIZE DIMENSIONS IMCLUDING MOLD MISMATCH. 3. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL NOT CAUSE THE LEAD WIDTH TO EXCEED THE MAXIMUM b DIMENSION BY MORE THAN 0.08mm
1. 2.
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W
13
7. Abbreviations
In this chapter some of the terms and abbreviations used throughout the technical reference manual are listed as follows. SIE CF MD SMC MS SD MMC UTMI Serial Interface Engine Compact Flash Micro Drive SmartMedia Card Memory Stick Secure Digital Multimedia Card USB Transceiver Macrocell Interface
About Alcor Micro, Corp.
Alcor Micro, Corp. designs, develops and markets highly integrated and advanced peripheral semiconductor, and software driver solutions for the personal computer and consumer electronics markets worldwide. We specialize in USB solutions and focus on emerging technology such as USB and IEEE 1394. The company offers a range of semiconductors including controllers for USB hub, integrated keyboard/USB hub and USB Flash memory card reader...etc. Alcor Micro, Corp. is based in Taipei, Taiwan, with sales offices in Taipei, Japan, Korea and California. Alcor Micro is distinguished by its ability to provide innovative solutions for spec-driven products. Innovations like single chip solutions for traditional multiple chip products and on-board voltage regulators enable the company to provide cost-efficiency solutions for the computer peripheral device OEM customers worldwide.
14
AU6366 USB 2.0 Single LUN Multiple Flash Card Reader Controller V1.03W

▲Up To Search▲

Price & Availability of AU6366

	To Download AU6366 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .